dmesg - trailer0 raid5
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-13-generic (buildd@roseapple) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #20-Ubuntu SMP Wed Oct 23 07:38:26 UTC 2013 (Ubuntu 3.11.0-13.20-generic 3.11.6)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
BIOS-e820: [mem 0x000000000008f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cf670fff] usable
BIOS-e820: [mem 0x00000000cf671000-0x00000000cf6befff] reserved
BIOS-e820: [mem 0x00000000cf6bf000-0x00000000cf6ecfff] usable
BIOS-e820: [mem 0x00000000cf6ed000-0x00000000cf7befff] ACPI NVS
BIOS-e820: [mem 0x00000000cf7bf000-0x00000000cf7e2fff] usable
BIOS-e820: [mem 0x00000000cf7e3000-0x00000000cf7effff] ACPI data
BIOS-e820: [mem 0x00000000cf7f0000-0x00000000cf7f0fff] usable
BIOS-e820: [mem 0x00000000cf7f1000-0x00000000cf7fefff] ACPI data
BIOS-e820: [mem 0x00000000cf7ff000-0x00000000cf7fffff] usable
BIOS-e820: [mem 0x00000000cf800000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000032fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: /DP55KG, BIOS KGIBX10J.86A.3878.2009.1028.1049 10/28/2009
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x330000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0C0000000 mask FF0000000 write-back
3 base 100000000 mask F00000000 write-back
4 base 200000000 mask E00000000 write-back
5 base 400000000 mask F00000000 write-back
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcf800 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000089000] 89000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd1000, 0x01fd1fff] PGTABLE
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
init_memory_mapping: [mem 0x32fe00000-0x32fffffff]
[mem 0x32fe00000-0x32fffffff] page 2M
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
init_memory_mapping: [mem 0x32c000000-0x32fdfffff]
[mem 0x32c000000-0x32fdfffff] page 2M
init_memory_mapping: [mem 0x300000000-0x32bffffff]
[mem 0x300000000-0x32bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcf670fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xcf5fffff] page 2M
[mem 0xcf600000-0xcf670fff] page 4k
init_memory_mapping: [mem 0xcf6bf000-0xcf6ecfff]
[mem 0xcf6bf000-0xcf6ecfff] page 4k
init_memory_mapping: [mem 0xcf7bf000-0xcf7e2fff]
[mem 0xcf7bf000-0xcf7e2fff] page 4k
init_memory_mapping: [mem 0xcf7f0000-0xcf7f0fff]
[mem 0xcf7f0000-0xcf7f0fff] page 4k
init_memory_mapping: [mem 0xcf7ff000-0xcf7fffff]
[mem 0xcf7ff000-0xcf7fffff] page 4k
init_memory_mapping: [mem 0x100000000-0x2ffffffff]
[mem 0x100000000-0x2ffffffff] page 2M
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
RAMDISK: [mem 0x35c72000-0x36e30fff]
ACPI: RSDP 00000000000fe020 00024 (v02 INTEL )
ACPI: XSDT 00000000cf7fd120 00074 (v01 INTEL KBIBX10J 00000F26 01000013)
ACPI: FACP 00000000cf7fc000 000F4 (v03 INTEL KBIBX10J 00000F26 MSFT 0100000D)
ACPI: DSDT 00000000cf7f8000 03D03 (v02 INTEL KBIBX10J 00000F26 MSFT 0100000D)
ACPI: FACS 00000000cf76c000 00040
ACPI: APIC 00000000cf7f7000 000BC (v02 INTEL KBIBX10J 00000F26 MSFT 0100000D)
ACPI: WDDT 00000000cf7f6000 00040 (v01 INTEL KBIBX10J 00000F26 MSFT 0100000D)
ACPI: MCFG 00000000cf7f5000 0003C (v01 INTEL KBIBX10J 00000F26 MSFT 0100000D)
ACPI: ASF! 00000000cf7f4000 000A5 (v32 INTEL KBIBX10J 00000F26 MSFT 0100000D)
ACPI: HPET 00000000cf7f3000 00038 (v01 INTEL KBIBX10J 00000F26 MSFT 0100000D)
ACPI: SSDT 00000000cf7e5000 0A0FC (v01 INTEL SSDT PM 00000F26 MSFT 0100000D)
ACPI: DMAR 00000000cf7e3000 00080 (v01 INTEL KBIBX10J 00000F26 MSFT 0100000D)
ACPI: WDTT 00000000cf7f2000 00224 (v02 INTEL KBIBX10J 00000F26 MSFT 0100000D)
ACPI: ASPT 00000000cf7f1000 00034 (v05 INTEL PerfTune 00000F26 MSFT 0100000D)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000032fffffff]
Initmem setup node 0 [mem 0x00000000-0x32fffffff]
NODE_DATA [mem 0x32fff1000-0x32fff5fff]
[ffffea0000000000-ffffea000cbfffff] PMD -> [ffff880323600000-ffff88032f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x32fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0008efff]
node 0: [mem 0x00100000-0xcf670fff]
node 0: [mem 0xcf6bf000-0xcf6ecfff]
node 0: [mem 0xcf7bf000-0xcf7e2fff]
node 0: [mem 0xcf7f0000-0xcf7f0fff]
node 0: [mem 0xcf7ff000-0xcf7fffff]
node 0: [mem 0x100000000-0x32fffffff]
On node 0 totalpages: 3143251
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3982 pages, LIFO batch:0
DMA32 zone: 13212 pages used for memmap
DMA32 zone: 845509 pages, LIFO batch:31
Normal zone: 35840 pages used for memmap
Normal zone: 2293760 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0008f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcf671000-0xcf6befff]
PM: Registered nosave memory: [mem 0xcf6ed000-0xcf7befff]
PM: Registered nosave memory: [mem 0xcf7e3000-0xcf7effff]
PM: Registered nosave memory: [mem 0xcf7f1000-0xcf7fefff]
PM: Registered nosave memory: [mem 0xcf800000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xffdfffff]
PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88032fc00000 s86720 r8192 d23872 u262144
pcpu-alloc: s86720 r8192 d23872 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3094114
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 12274628K/12573004K available (7141K kernel code, 1081K rwdata, 3260K rodata, 1364K init, 1420K bss, 298376K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:744 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 50331648 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2800.126 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.25 BogoMIPS (lpj=11200504)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27803 entries in 109 pages
dmar: Host address width 36
dmar: DRHD base: 0x000000fe710000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fe710000 ver 1:0 cap c90780106f0462 ecap f020a2
dmar: RMRR base: 0x000000cf69c000 end: 0x000000cf69cfff
dmar: RMRR base: 0x000000cf699000 end: 0x000000cf699fff
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz (fam: 06, model: 1e, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
perf_event_intel: CPU erratum AAJ80 worked around
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
Brought up 8 CPUs
smpboot: Total of 8 processors activated (44802.01 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcf6ed000-0xcf7befff] (860160 bytes)
regulator-dummy: no parameters
RTC time: 10:18:42, date: 12/01/13
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A08:00: ACPI _OSC control (0x19) granted
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff]
pci 0000:00:00.0: [8086:d131] type 00 class 0x060000
pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
pci 0000:00:19.0: [8086:10f0] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xe2300000-0xe231ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xe2324000-0xe2324fff]
pci 0000:00:19.0: reg 0x18: [io 0x4040-0x405f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xe2402000-0xe24023ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xe2320000-0xe2323fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:3b50] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xe2403000-0xe24033ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3b02] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
pci 0000:00:1f.2: reg 0x10: [io 0x4068-0x406f]
pci 0000:00:1f.2: reg 0x14: [io 0x4074-0x4077]
pci 0000:00:1f.2: reg 0x18: [io 0x4060-0x4067]
pci 0000:00:1f.2: reg 0x1c: [io 0x4070-0x4073]
pci 0000:00:1f.2: reg 0x20: [io 0x4020-0x403f]
pci 0000:00:1f.2: reg 0x24: [mem 0xe2325000-0xe23257ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xe2326000-0xe23260ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x4000-0x401f]
pci 0000:01:00.0: [10de:0295] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xe1000000-0xe1ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe0ffffff 64bit]
pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xe1ffffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [104c:8241] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xe2200000-0xe220ffff 64bit]
pci 0000:03:00.0: reg 0x18: [mem 0xe2210000-0xe2211fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [mem 0xe2200000-0xe22fffff]
pci 0000:00:1c.6: PCI bridge to [bus 04]
pci 0000:05:00.0: [11ab:6145] type 00 class 0x01048f
pci 0000:05:00.0: reg 0x10: [io 0x2018-0x201f]
pci 0000:05:00.0: reg 0x14: [io 0x2024-0x2027]
pci 0000:05:00.0: reg 0x18: [io 0x2010-0x2017]
pci 0000:05:00.0: reg 0x1c: [io 0x2020-0x2023]
pci 0000:05:00.0: reg 0x20: [io 0x2000-0x200f]
pci 0000:05:00.0: reg 0x24: [mem 0xe2100000-0xe21003ff]
pci 0000:05:00.0: reg 0x30: [mem 0xfffc0000-0xffffffff pref]
pci 0000:05:00.0: supports D1
pci 0000:05:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:1c.7: PCI bridge to [bus 05]
pci 0000:00:1c.7: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.7: bridge window [mem 0xe2100000-0xe21fffff]
pci 0000:06:00.0: [1415:9505] type 00 class 0x070006
pci 0000:06:00.0: reg 0x10: [io 0x1078-0x107f]
pci 0000:06:00.0: reg 0x14: [io 0x1070-0x1077]
pci 0000:06:00.0: reg 0x18: [io 0x1068-0x106f]
pci 0000:06:00.0: reg 0x1c: [io 0x1060-0x1067]
pci 0000:06:00.0: reg 0x20: [io 0x1040-0x105f]
pci 0000:06:00.0: reg 0x24: [mem 0xe2006000-0xe2006fff]
pci 0000:06:00.0: supports D2
pci 0000:06:00.0: PME# supported from D0 D2 D3hot
pci 0000:06:00.1: [1415:9500] type 00 class 0x000000
pci 0000:06:00.1: reg 0x10: [io 0x1020-0x103f]
pci 0000:06:00.1: reg 0x14: [mem 0xe2005000-0xe2005fff]
pci 0000:06:00.1: reg 0x18: [io 0x1000-0x101f]
pci 0000:06:00.1: reg 0x1c: [mem 0xe2004000-0xe2004fff]
pci 0000:06:00.1: supports D2
pci 0000:06:00.1: PME# supported from D0 D2 D3hot
pci 0000:06:03.0: [104c:8023] type 00 class 0x0c0010
pci 0000:06:03.0: reg 0x10: [mem 0xe2007000-0xe20077ff]
pci 0000:06:03.0: reg 0x14: [mem 0xe2000000-0xe2003fff]
pci 0000:06:03.0: supports D1 D2
pci 0000:06:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1e.0: bridge window [mem 0xe2000000-0xe20fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xf7ffffff] (subtractive decode)
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: Enabled 2 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus 3f
PCI: root bus 3f: using default resources
PCI: Probing PCI hardware (bus 3f)
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
pci 0000:3f:00.0: [8086:2c51] type 00 class 0x060000
pci 0000:3f:00.1: [8086:2c81] type 00 class 0x060000
pci 0000:3f:02.0: [8086:2c90] type 00 class 0x060000
pci 0000:3f:02.1: [8086:2c91] type 00 class 0x060000
pci 0000:3f:03.0: [8086:2c98] type 00 class 0x060000
pci 0000:3f:03.1: [8086:2c99] type 00 class 0x060000
pci 0000:3f:03.4: [8086:2c9c] type 00 class 0x060000
pci 0000:3f:04.0: [8086:2ca0] type 00 class 0x060000
pci 0000:3f:04.1: [8086:2ca1] type 00 class 0x060000
pci 0000:3f:04.2: [8086:2ca2] type 00 class 0x060000
pci 0000:3f:04.3: [8086:2ca3] type 00 class 0x060000
pci 0000:3f:05.0: [8086:2ca8] type 00 class 0x060000
pci 0000:3f:05.1: [8086:2ca9] type 00 class 0x060000
pci 0000:3f:05.2: [8086:2caa] type 00 class 0x060000
pci 0000:3f:05.3: [8086:2cab] type 00 class 0x060000
pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
e820: reserve RAM buffer [mem 0xcf671000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf6ed000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf7e3000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf7f1000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 40 for MSI
hpet: hpet3 irq 41 for MSI
hpet: hpet4 irq 42 for MSI
hpet: hpet5 irq 43 for MSI
hpet: hpet6 irq 44 for MSI
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfeb03fff] has been reserved
system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:00: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:00: [mem 0xfed1a000-0xfed1afff] has been reserved
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfed45000-0xfed99fff] has been reserved
system 00:00: [mem 0x000c0000-0x000dffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:00: [mem 0xff000000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:05: [io 0x0500-0x057f] has been reserved
system 00:05: [io 0x0400-0x047f] could not be reserved
system 00:05: [io 0x0680-0x06ff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:05:00.0: no compatible bridge window for [mem 0xfffc0000-0xffffffff pref]
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.6: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
pci 0000:00:1c.7: bridge window [mem 0x00100000-0x001fffff pref] to [bus 05] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.6: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.6: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.7: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.6: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xe2500000-0xe26fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xe2700000-0xe28fffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xe2900000-0xe2afffff 64bit pref]
pci 0000:00:1c.6: BAR 14: assigned [mem 0xe2b00000-0xe2cfffff]
pci 0000:00:1c.6: BAR 15: assigned [mem 0xe2d00000-0xe2efffff 64bit pref]
pci 0000:00:1c.7: BAR 15: assigned [mem 0xe2f00000-0xe31fffff pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff]
pci 0000:00:1c.4: BAR 13: assigned [io 0x6000-0x6fff]
pci 0000:00:1c.6: BAR 13: assigned [io 0x7000-0x7fff]
pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xe1ffffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0xe2500000-0xe26fffff]
pci 0000:00:1c.0: bridge window [mem 0xe2700000-0xe28fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.4: bridge window [mem 0xe2200000-0xe22fffff]
pci 0000:00:1c.4: bridge window [mem 0xe2900000-0xe2afffff 64bit pref]
pci 0000:00:1c.6: PCI bridge to [bus 04]
pci 0000:00:1c.6: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.6: bridge window [mem 0xe2b00000-0xe2cfffff]
pci 0000:00:1c.6: bridge window [mem 0xe2d00000-0xe2efffff 64bit pref]
pci 0000:05:00.0: BAR 6: assigned [mem 0xe2f00000-0xe2f3ffff pref]
pci 0000:00:1c.7: PCI bridge to [bus 05]
pci 0000:00:1c.7: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.7: bridge window [mem 0xe2100000-0xe21fffff]
pci 0000:00:1c.7: bridge window [mem 0xe2f00000-0xe31fffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 06]
pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1e.0: bridge window [mem 0xe2000000-0xe20fffff]
pci 0000:00:1c.0: enabling device (0000 -> 0003)
pci 0000:00:1c.6: enabling device (0000 -> 0003)
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xd0000000-0xf7ffffff]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe1ffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:02: resource 1 [mem 0xe2500000-0xe26fffff]
pci_bus 0000:02: resource 2 [mem 0xe2700000-0xe28fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:03: resource 1 [mem 0xe2200000-0xe22fffff]
pci_bus 0000:03: resource 2 [mem 0xe2900000-0xe2afffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:04: resource 1 [mem 0xe2b00000-0xe2cfffff]
pci_bus 0000:04: resource 2 [mem 0xe2d00000-0xe2efffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:05: resource 1 [mem 0xe2100000-0xe21fffff]
pci_bus 0000:05: resource 2 [mem 0xe2f00000-0xe31fffff pref]
pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:06: resource 1 [mem 0xe2000000-0xe20fffff]
pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 7 [mem 0xd0000000-0xf7ffffff]
pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18172K (ffff880035c72000 - ffff880036e31000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcb671000-0xcf671000] (64MB) mapped at [ffff8800cb671000-ffff8800cf670fff]
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1385893122.544:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 24009
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:03.0: irq 45 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 46 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 47 for MSI/MSI-X
pcieport 0000:00:1c.6: irq 48 for MSI/MSI-X
aer 0000:00:03.0:pcie02: service driver aer loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 3b42 ss_vid 8086 ss_did 424b
pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 3b4a ss_vid 8086 ss_did 424b
pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.6:pcie04: HPC vendor_id 8086 device_id 3b4e ss_vid 8086 ss_did 424b
pciehp 0000:00:1c.6:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1E
intel_idle: lapic_timer_reliable_states 0x2
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
GHES: HEST is not enabled!
ttyS4: detected caps 00000700 should be 00000500
0000:06:00.0: ttyS4 at I/O 0x1078 (irq = 21) is a 16C950/954
ttyS5: detected caps 00000700 should be 00000500
0000:06:00.0: ttyS5 at I/O 0x1070 (irq = 21) is a 16C950/954
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xe2402000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-13-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xe2403000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.0-13-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 50 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 51 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 52 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 53 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 54 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 55 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 56 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.0-13-generic xhci_hcd
usb usb3: SerialNumber: 0000:03:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.11.0-13-generic xhci_hcd
usb usb4: SerialNumber: 0000:03:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 0d2f067ae81edbe7efb6ee2c61c63d9bdcf0659d'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 9:441:324
tty tty49: hash matches
acpi PNP0B00:00: hash matches
rtc_cmos 00:02: setting system clock to 2013-12-01 10:18:43 UTC (1385893123)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1040K (ffff8800016fc000 - ffff880001800000)
Freeing unused kernel memory: 836K (ffff880001b2f000 - ffff880001c00000)
systemd-udevd[148]: starting version 204
linear: module verification failed: signature and/or required key missing - tainting kernel
md: linear personality registered for level -1
md: multipath personality registered for level -4
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid6: sse2x1 7218 MB/s
firewire_ohci 0000:06:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
raid6: sse2x2 9724 MB/s
raid6: sse2x4 10827 MB/s
raid6: using algorithm sse2x4 (10827 MB/s)
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
usb 1-1: new high-speed USB device number 2 using ehci-pci
prefetch64-sse: 12040.000 MB/sec
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:27:0e:02:7b:d7
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 9, PBA No: FFFFFF-0FF
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 58 for MSI/MSI-X
ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
generic_sse: 10608.000 MB/sec
xor: using function: prefetch64-sse (12040.000 MB/sec)
async_tx: api initialized (async)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xe2325000 port 0xe2325100 irq 58
ata2: SATA max UDMA/133 abar m2048@0xe2325000 port 0xe2325180 irq 58
ata3: SATA max UDMA/133 abar m2048@0xe2325000 port 0xe2325200 irq 58
ata4: SATA max UDMA/133 abar m2048@0xe2325000 port 0xe2325280 irq 58
ata5: SATA max UDMA/133 abar m2048@0xe2325000 port 0xe2325300 irq 58
ata6: SATA max UDMA/133 abar m2048@0xe2325000 port 0xe2325380 irq 58
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
firewire_core 0000:06:03.0: created device fw0: GUID 00902700025430a1, S400
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM05B0Q, max UDMA/133
ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DXM0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ata5.00: ATA-8: WDC WD2003FYYS-02W0B0, 01.01D01, max UDMA/133
ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: ATA-8: WDC WD2003FYYS-02W0B0, 01.01D01, max UDMA/133
ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata6.00: ATA-8: WDC WD2003FYYS-02W0B0, 01.01D01, max UDMA/133
ata6.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD2003FYYS-0 01.0 PQ: 0 ANSI: 5
ata4.00: ATA-8: WDC WD2003FYYS-02W0B0, 01.01D01, max UDMA/133
ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
ata3.00: ATA-8: WDC WD2003FYYS-02W0B0, 01.01D01, max UDMA/133
ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata6.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata4.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD2003FYYS-0 01.0 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
scsi 3:0:0:0: Direct-Access ATA WDC WD2003FYYS-0 01.0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 4:0:0:0: Direct-Access ATA WDC WD2003FYYS-0 01.0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 5:0:0:0: Direct-Access ATA WDC WD2003FYYS-0 01.0 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 5:0:0:0: Attached scsi generic sg5 type 0
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
sde: sde1 sde2
sd 4:0:0:0: [sde] Attached SCSI disk
sdf: sdf1 sdf2
sd 5:0:0:0: [sdf] Attached SCSI disk
sdd: sdd1 sdd2
sdc: sdc1 sdc2
sd 3:0:0:0: [sdd] Attached SCSI disk
sd 2:0:0:0: [sdc] Attached SCSI disk
BAR5:00:04 01:7F 02:22 03:C8 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:1F 0D:00 0E:00 0F:00
scsi6 : pata_marvell
scsi7 : pata_marvell
ata7: PATA max UDMA/100 cmd 0x2018 ctl 0x2024 bmdma 0x2000 irq 19
ata8: PATA max UDMA/133 cmd 0x2010 ctl 0x2020 bmdma 0x2008 irq 19
BAR5:00:04 01:7F 02:22 03:C8 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:1F 0D:00 0E:00 0F:00
usb 1-1.4: new low-speed USB device number 3 using ehci-pci
bio: create slab at 1
md: bind
md: bind
md: bind
md: bind
usb 1-1.4: New USB device found, idVendor=413c, idProduct=2105
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4: Product: Dell USB Keyboard
usb 1-1.4: Manufacturer: Dell
md: bind
md/raid:md0: not clean -- starting background reconstruction
md/raid:md0: device sdc1 operational as raid disk 1
md/raid:md0: device sdd1 operational as raid disk 2
md/raid:md0: device sdf1 operational as raid disk 4
md/raid:md0: device sdb1 operational as raid disk 0
md/raid:md0: device sde1 operational as raid disk 3
md/raid:md0: allocated 5394kB
md/raid:md0: raid level 5 active with 5 out of 5 devices, algorithm 2
RAID conf printout:
--- level:5 rd:5 wd:5
disk 0, o:1, dev:sdb1
disk 1, o:1, dev:sdc1
disk 2, o:1, dev:sdd1
disk 3, o:1, dev:sde1
disk 4, o:1, dev:sdf1
md0: detected capacity change from 0 to 7599455993856
md: resync of RAID array md0
md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
md: using 128k window, over a total of 1855335936k.
md: resuming resync of md0 from checkpoint.
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input2
hid-generic 0003:413C:2105.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.0-1.4/input0
bcache: bch_journal_replay() journal replay done, 3 keys in 5 entries, seq 325663
bcache: register_cache() registered cache device sda3
md0: unknown partition table
usb 1-1.6: new full-speed USB device number 4 using ehci-pci
tsc: Refined TSC clocksource calibration: 2800.099 MHz
usb 1-1.6: New USB device found, idVendor=0461, idProduct=4d99
usb 1-1.6: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-1.6: Product: Asus gaming Mouse (G112)
input: Asus gaming Mouse (G112) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input3
hid-generic 0003:0461:4D99.0002: input,hidraw1: USB HID v1.11 Mouse [Asus gaming Mouse (G112)] on usb-0000:00:1a.0-1.6/input0
bcache: register_bdev() registered backing device md0
usb 2-1.6: new full-speed USB device number 3 using ehci-pci
bcache: bch_cached_dev_attach() Caching md0 as bcache0 on set cb90ccb1-1da7-48cf-b5b6-e25fc24c9876
usb 2-1.6: New USB device found, idVendor=0a12, idProduct=0001
usb 2-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 19530748k swap on /dev/sda2. Priority:-1 extents:1 across:19530748k SSFS
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
Switched to clocksource tsc
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[584]: starting version 204
lp: driver loaded but no devices found
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
adt7475 0-002c: ADT7490 device, revision 3
adt7475 0-002c: Optional features: in0 in4 fan4 pwm2
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
init: avahi-cups-reload main process (649) terminated with status 1
ppdev: user-space parallel port driver
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
wmi: Mapper loaded
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \IGPO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
EDAC MC: Ver: 3.0.0
usbcore: registered new interface driver btusb
EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:3f:03.0
EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3f:03.0' (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x3
type=1400 audit(1385893126.512:2): apparmor="STATUS" operation="profile_load" parent=720 profile="unconfined" name="/sbin/dhclient" pid=726 comm="apparmor_parser"
type=1400 audit(1385893126.516:3): apparmor="STATUS" operation="profile_load" parent=720 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=726 comm="apparmor_parser"
type=1400 audit(1385893126.516:4): apparmor="STATUS" operation="profile_load" parent=720 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=726 comm="apparmor_parser"
type=1400 audit(1385893126.516:5): apparmor="STATUS" operation="profile_replace" parent=720 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=726 comm="apparmor_parser"
type=1400 audit(1385893126.516:6): apparmor="STATUS" operation="profile_replace" parent=720 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=726 comm="apparmor_parser"
type=1400 audit(1385893126.516:7): apparmor="STATUS" operation="profile_load" parent=694 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=710 comm="apparmor_parser"
type=1400 audit(1385893126.516:8): apparmor="STATUS" operation="profile_load" parent=694 profile="unconfined" name="/usr/sbin/cupsd" pid=710 comm="apparmor_parser"
type=1400 audit(1385893126.516:9): apparmor="STATUS" operation="profile_replace" parent=720 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=726 comm="apparmor_parser"
type=1400 audit(1385893126.516:10): apparmor="STATUS" operation="profile_replace" parent=694 profile="unconfined" name="/usr/sbin/cupsd" pid=710 comm="apparmor_parser"
snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
hda_codec: ALC889: SKU not ready 0x411111f0
autoconfig: line_outs=4 (0x14/0x19/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x1e
inputs:
Front Mic=0x18
Rear Mic=0x1b
Line=0x1a
dig-in=0x1f
realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
realtek: Enable default setup for auto mode as fallback
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.88 Wed Mar 27 14:26:46 PDT 2013
gpio_ich: GPIO from 180 to 255 on gpio_ich
microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x3
microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x3
microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x3
microcode: CPU4 sig=0x106e5, pf=0x2, revision=0x3
microcode: CPU5 sig=0x106e5, pf=0x2, revision=0x3
microcode: CPU6 sig=0x106e5, pf=0x2, revision=0x3
microcode: CPU7 sig=0x106e5, pf=0x2, revision=0x3
microcode: Microcode Update Driver: v2.00 , Peter Oruba
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
Bridge firewalling registered
device eth0 entered promiscuous mode
init: udev-fallback-graphics main process (1092) terminated with status 1
e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
br0: port 1(eth0) entered forwarding state
br0: port 1(eth0) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
init: failsafe main process (953) killed by TERM signal
type=1400 audit(1385893133.368:11): apparmor="STATUS" operation="profile_replace" parent=1872 profile="unconfined" name="/sbin/dhclient" pid=1879 comm="apparmor_parser"
type=1400 audit(1385893133.368:12): apparmor="STATUS" operation="profile_replace" parent=1872 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1879 comm="apparmor_parser"
type=1400 audit(1385893133.368:13): apparmor="STATUS" operation="profile_replace" parent=1872 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1879 comm="apparmor_parser"
type=1400 audit(1385893133.368:14): apparmor="STATUS" operation="profile_replace" parent=1872 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1879 comm="apparmor_parser"
type=1400 audit(1385893133.368:15): apparmor="STATUS" operation="profile_replace" parent=1872 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1879 comm="apparmor_parser"
type=1400 audit(1385893133.368:16): apparmor="STATUS" operation="profile_replace" parent=1872 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1879 comm="apparmor_parser"
type=1400 audit(1385893133.368:17): apparmor="STATUS" operation="profile_load" parent=1872 profile="unconfined" name="/usr/lib/libvirt/virt-aa-helper" pid=1882 comm="apparmor_parser"
type=1400 audit(1385893133.368:18): apparmor="STATUS" operation="profile_load" parent=1872 profile="unconfined" name="/usr/sbin/libvirtd" pid=1885 comm="apparmor_parser"
type=1400 audit(1385893133.368:19): apparmor="STATUS" operation="profile_replace" parent=1872 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1884 comm="apparmor_parser"
type=1400 audit(1385893133.368:20): apparmor="STATUS" operation="profile_replace" parent=1872 profile="unconfined" name="/usr/sbin/cupsd" pid=1884 comm="apparmor_parser"
Ebtables v2.0 registered
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
md: bind
md: bind
md: bind
md: bind
md: bind
md/raid:md127: device sde2 operational as raid disk 3
md/raid:md127: device sdd2 operational as raid disk 2
md/raid:md127: device sdc2 operational as raid disk 1
md/raid:md127: device sdb2 operational as raid disk 0
md/raid:md127: allocated 5394kB
md/raid:md127: raid level 5 active with 4 out of 5 devices, algorithm 2
RAID conf printout:
--- level:5 rd:5 wd:4
disk 0, o:1, dev:sdb2
disk 1, o:1, dev:sdc2
disk 2, o:1, dev:sdd2
disk 3, o:1, dev:sde2
md127: detected capacity change from 0 to 401327783936
RAID conf printout:
--- level:5 rd:5 wd:4
disk 0, o:1, dev:sdb2
disk 1, o:1, dev:sdc2
disk 2, o:1, dev:sdd2
disk 3, o:1, dev:sde2
disk 4, o:1, dev:sdf2
md: delaying recovery of md127 until md0 has finished (they share one or more physical units)
md127: unknown partition table
perf samples too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf samples too long (5086 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
md: md0: resync done.
md: recovery of RAID array md127
md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
md: using 128k window, over a total of 97980416k.
RAID conf printout:
--- level:5 rd:5 wd:5
disk 0, o:1, dev:sdb1
disk 1, o:1, dev:sdc1
disk 2, o:1, dev:sdd1
disk 3, o:1, dev:sde1
disk 4, o:1, dev:sdf1
md: md127: recovery done.
RAID conf printout:
--- level:5 rd:5 wd:5
disk 0, o:1, dev:sdb2
disk 1, o:1, dev:sdc2
disk 2, o:1, dev:sdd2
disk 3, o:1, dev:sde2
disk 4, o:1, dev:sdf2
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
XFS (md127): Mounting Filesystem
XFS (md127): Ending clean mount